Dana 300 Twin Stick Shift Pattern

Dana 300 Twin Stick Shift Pattern – On top of that you think a twin sticked transfercase is hardcore, do me a favor push one lever forward and pull the other back and that should keep you from. Reinstall the cluster gear, needle. Dana 300 twinstick shift pattern. 0:00 / 7:33 • intro jb custom fabrication jeep dana 300 twin stick shifter taboo customs 3.9k subscribers subscribe subscribed 5.8k views 2 years ago we.

#1 after searching the internet for hours i was able to find scattered information about twin sticking a dana 300. Old shift rails to determine which is the front and which is the rear.) 8. The twin stick shifter will allow you to shift your dana 300 transfer case into high or low range in either two or four wheel drive. With the behemoth twin stick flip kit installed on your driver’s drop dana 300, all of your shifter mechanisms are moved back to the top of the case, al ditch all of the original.

Dana 300 Twin Stick Shift Pattern

I wasn't able to find much technical specs. We have the solution for you. Our cable shifter kit includes all the hardware, control cables (3' standard, 4' available), shifter boot and laser cut bracketry you will need to twin.

Using blue loctite, reinstall the shift fork set screws. Sometimes you can just gently push it into 4h while driving, sometimes you need to touch the clutch. I have found a few sites with shift patterns on a dana 300.

There is an interlock pin between the shifter rails. I’m assuming the conversion is the same for. This kit allows the dana 300 to be shifted to the following configurations:

This assembly will require the installation of new shift rails into your transfer case.

Dana 300 Twin Stick Shifter Collins Bros Jeep